4-Axis Stepping and Servo Motor Control Universal PCI Card

研华PCI-1245L

4-Axis Stepping and Servo Motor Control Universal PCI Card

【产品特点】

● Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
● Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting
● BSupports 2 axis linear interpolation
● Supports 3 axis linear interpolation (PCI-1245LIO only)
● Supports 2 axis arc interpolation (PCI-1245LIO only)
● Supports T/S-curve
● Supports speed override
● Hardware emergency input
● Watchdog timer
● Supports programmable acceleration/deceleration rate
● Programmable interrupt
● RDY dedicated input channels & SVON/ERC dedicated output channels are switchable for general input and output purposes
● Supports extra 16 isolated DI / 16 isolated DO via wiring board (PCI-1245LIO only)

产品介绍及尺寸图

【产品概述】

The PCI-1245Lare 4-axis universal PCI card supporting (both 3.3 V and 5 V signal slots) stepping/pulse-type servo motor control cards designed for entry-level applications which need to control JOG, point to point, continuous move, and interpolation motion such as 2-axis linear. In addition, all Advantech motion controllers use the “Common Motion API” architecture which is a unified user programming interface and graphical utility. This architecture saves application maintenance and upgrades. Programmers can benefit from integrating any Advantech SoftMotion controller without changing large amounts of the application code. User-friendly examples decrease programming workload, helping users complete configuration and diagnosis easily.

产品规格

Pulse Type Motion Control	Motor Driver Support	Pulse-type servo/stepping
	Number of Axes	4
	Interpolation	2-axis linear interpolation
	Max. Output Speed	1 Mbps
	Step Count Range	±2, 147, 483, 646
	Pulse Output Type	Pulse/direction (1-pulse, 1-direction type) , CW/CCW (2-pulse type) or single-ended +5V output
	Position Counters	Range of command and actual position
	Velocity Profiles	T-Curve, S-Curve
	Local I/O	Machine Interfaces:LMT+, LMT-, ORG Servo Driver Interfaces:ALM, INP
Encoder Interface	Input Type	Quadrature (A/B phase) or up/down
	Counts /Enc. Cycle	x1, x2, x4 (A/B phase only)
	Input Range	3~10 V
	Isolation Protection	2,500 VDC
	Max. Input Frequency	10 MHz under 4xAB mode
General	Bus Type	Universal PCI V2.2
	Connectors	1 x 100-pin SCSI female connector
	Dimensions (L x H)	175 x 100 mm (6.9" x 3.9")
	Power Consumption	Typical: 5 V @ 0.6 A Max.: 5 V @ 1 A
	Humidity	5 ~ 95% RH, non-condensing (IEC 60068-2-3)
	Operating Temperature	0 ~ 60°C (32 ~ 140°F)
	Storage Temperature	-20 ~ 85°C (-4 ~ 185°F)

订购信息

Ordering Information

Part No.	Description
PCI-1245L-AE	4-axis Stepping/Pulse-type Servo Motor Control Universal PCI Card

Accessories

Part No.	Description
MTB-3956LIO-AE	100-pin DIN-rail SCSI 4-axis Motion Wiring Board w/ I/O-extension (Only for PCI-1245LIO)
ADAM-3956-AE	100-pin DIN-rail SCSI 4-axis Motion Wiring Board
ADAM-3955-AE	50-pin DIN-rail SCSI 2-axis Motion Wiring Board
ADAM-3952-AE	50-pin DIN-rail SCSI and Box Header Board
PCL-101100M-1E/2E/3E	100-pin SCSI Cable, 1m/2m/3m
PCL-10251-1E/2E/3E	100-pin SCSI to Two 50-pin SCSI Cable, 1m/2m/3m
PCL-20153PA5-S2E	50-pin Cable to Panasonic A4/A5 Servo, 2 m
PCL-20153YS5-S2E	50-pin Cable to Yaskawa Sigma V/7 Servo, 2 m
PCL-20153MJ3-S2E	50-pin Cable to Mitsubishi J3/J4 Servo, 2 m
PCL-20153DA2-S2E	50-pin Cable to Delta A2 Servo, 2 m

返回列表->

电话
139-1328-0497
邮箱
houyafei321@163.com
微信联系
微信联系

1.点击下面按钮复制微信号

13913280497

点击复制微信号

苏州研炎电子科技有限公司

产品中心

运动控制卡